Reinforcing Steel
Available as stock 20' lengths or fabricated.
We offer complete estimating, detailing, & fabricating services.
Epoxy coating available for special orders.
| Bar Size | US Metric | Diameter | Weight | Weight | Grades & Types |
|---|---|---|---|---|---|
| #3 | #10 | 0.375 | 0.376 | 0.560 | GRADE 60 |
| #4 | #13 | 0.500 | 0.668 | 0.994 | GRADE 40 & 60, EPOXY |
| #5 | #16 | 0.625 | 1.043 | 1.552 | GRADE 40 & 60, EPOXY |
| #6 | #19 | 0.750 | 1.502 | 2.235 | GRADE 60, EPOXY |
| #7 | #22 | 0.875 | 2.044 | 3.042 | GRADE 60 |
| #8 | #25 | 1.000 | 2.670 | 3.973 | GRADE 60 |
| #9 | #29 | 1.125 | 3.400 | 5.060 | GRADE 60 |
| #10 | #32 | 1.270 | 4.303 | 6.404 | GRADE 60 |
Stetson Building Products, Inc. Rebar Warehouses
 |
 |
 |
 |
 |
 |
| Product: Rebar and Mesh Project: Lowe's Distribution Center (1.4 million square feet) 33 acres under roof, Rockford, Illinois |
|
Stetson Building Products, Inc. fabricates reinforcing steel in the following warehouses:
- Omaha, Des Moines, Maquoketa Distribution Center-full fabrication services for most Eastern Stetson locations. (full fabrication)
- Rockford: Shearer and Small Bender
- Cedar Rapids: Shearer
All locations have full access to all Reinforcing steel products and fabrication requirements for all of your job needs. Please select a link below to learn more about our reinforcing steel products:
- Rebar Support Chairs
- Individual High Chair
- Bar Chair
- Slab Bolsters
- Continuous High Chair
- Typical Rebar Bends
- Welded Wire Fabric
- Rebar Caps
- Concrete Test Cylinders
- Tie Wire
- Bar Ties
- Bar Tie Twister
- Coil Wire
Rebar Support Chairs
Rebar Support Chairs can be used for at grade or precast applications with the use of #3 through #5 rebar or post-tension cable.
- Rod snaps easily into chair
- Wide base allows chair to stand securely
- Eliminates wire tying
- Non-corrosive durable polypropylene
- Non-conducive, perfect for bridge decks
Rebar supports are available in a variety of sizes.
Individual High Chair
Individual High Chair is used to support upper steel directly or by means or a carrier bar. Available in bright basic, plastic protected, galvanized and stainless steel protected. (Not all available in stock).
Bar Chair
Bar Chair is used to support widely spaced light steel in slab construction. Available in 3/4" to 2" heights in bright basic, plastic protected, galvanized and stainless steel protected. (Not all available in stock).
Slab Bolsters
Slab Bolster is used to support lower slab steel from the slab form. Legs are spaced on 5" centers. Available in 3/4" to 3" heights in 5' lengths and in bright basic, galvanized, plastic protected or stainless steel protected. (Not all available in stock).
Continuous High Chair
Continuous High Chair provides support for upper slab steel, eliminating the need for carrier bars. Fabricated in 2" to 15" heights, in 5" lengths with legs spaced on 8" centers. Available in bright basic, plastic protected, galvanized and stainless steel protected. (Not all available in stock).
Available in a variety of sizes and heights.
Typical Rebar Bends
Welded Wire Fabric
| CURRENT DESIGNATION | PREVIOUS DESIGNATION | STEEL AREA SQ. IN PER FT. | APPROX. LBS PER | TYPES STOCKED |
|---|---|---|---|---|
| 6 X 6-W1.4 X W1.4 | 6 X 6 - 10 X 10 | 0.028 | 21 | SHEETS & ROLLS |
| 6 X 6-W2.1 X W2.1 | 6 X 6 - 8 X 8 | 0.040 | 29 | SHEETS |
| 6 X 6-W2.9 X W2.9 | 6 X 6 - 6 X 6 | 0.058 | 42 | SHEETS |
Rebar Caps
Complies with Federal OSHA 701 (b). - Federal OSHA has ruled that if cover is in compliance with Cal OSHA, then it conforms to Fed. 701 (b).
- Made of engineered high-impact plastic.
- 4x4 top surface area aids in protection.
- Fits a range of diameters.
- No exposed steel parts.
- Inspection hole to insure metal insert in place.
- Fits Rebar sizes #3 to #7.
Concrete Test Cylinders
Concrete Test Cylinders meet all ASTM and AASHTO standards.
Reinforced lip and bottom keeps cylinder uniform. Standard flat or domed lid available.
Tie Wire
Mar-Mac Coil/Tie Wire, black annealed, and bonded plastic coated, is drawn, annealed, and coated. It is used for tying reinforcing steel. Soft and flexible, it comes in one continuous piece of wire per coil, with no tangles, no crossovers, and no tight spots. It comes off the reel like it's supposed to.
Bar Ties
Made from wire drawn and annealed from high-quality rod, Mar-Mac Wire Ties are a quick and efficient means of tying reinforcing steel (bar ties), and for closing packages of various types, including paper, plastic and fabric (bag ties). Wire Ties are also used for tying vines to trellises, and for securing rolls of paper, knit goods, carpets and cloth.
Measurements:
Wire Ties are measured from tip to tip. The standard loop is 5/16" I.D. For new applications, wire length should be specified 1" greater than the closed circumference.
Bar Tie Twister
Coil Wire
Coil Wire for general tying, handling, and bundling. Each roll is tied securely to insure a tight, uniform package.
Stetson Building Products
has opened their 9th location Madison, Wisconsin... visit their link from the navigation bar for more details!