Stetson Building Products
Skip to main content
Clear all
By Brand:

Repair Mortar

Page of 2
Per Page
Showing 1-12 of 17
Euclid Euco-Speed MP, 50 Lb

MasterEmaco T 1060 General Purpose/All Weather is a one-component shrinkage-compensated very rapid-setting cement-based mortar. It is designed for repairing horizontal concrete surfaces where high-early strength gain is required.

Recommended uses:

  • Interior and exterior
  • Horizontal surfaces
  • Applications requiring high early-strength gain
  • Structural concrete repairs
  • Partial and full-depth repairs

Features:

  • Extra low permeability helps minimize chloride intrusion
  • Excellent resistance to freeze/thaw cycling
  • Shrinkage compensated, minimizing cracking from drying shrinkage reducing stress at the bond line
  • Proprietary cement blend bonds to carbonated and noncarbonated concrete substrates

Benefits:

  • Very rapid-setting so that structures can be opened to vehicular traffic in 1 hour
  • Low residual moisture, can be coated in as little as 4 hours
  • Can be extended up to 100% by weight providing higher yields

Formerly known as 10-60 Rapid Mortar Repair

MasterEmaco N 424 is a general purpose, fast-setting, non-sag cement-based repair mortar for small repairs on vertical, horizontal, and overhead surfaces. Recommended uses: Interior and exterior, Vertical and overhead, Above and below grade, Spalls or holes in concrete, Deteriorated edges. FEATURES: Non-sag consistency able to be placed in 1"(25 mm) thick lifts, Fast-setting, Only requires the addition of potable water.
BASF MasterEmaco® N 427, 50 lb Bag
BASF MasterFlow® Anchor Cement 50 lb

MasterProtect EL 750 is a water-based, high-build, elastomeric, 100% acrylic waterproof coating for above-grade concrete, masonry, stucco and EIFS. Recommended uses: Exterior, Vertical surfaces, Above grade, Protecting and waterproofing. 

Features:

  • Available in a broad range of colors and textures for design versatility
  • Resists wind-driven rain; helps prevent water penetration into the substrate 
  • Breathable to allow water vapor to escape
  • Excellent adhesion, bonds securely to substrate for long-term durability
  • Excellent hiding power
  • Textured formulations help improve aesthetics of irregular substrates
  • Low VOC content for broad compliance across all regions
  • Resistant to dirt pickup
  • Also available in algae-resistant (AA) formula for versatility
  • Masters Painters Institute (MPI) approved

Benefits: 

  • High elongation and recovery for durable performance over dynamic cracks
  • UV resistance provides excellent color retention for a long-lasting, attractive finish
  • Effective carbon dioxide diffusion barrier, protects embedded steel from corrosion
  • Flexibility at very low temperatures makes it suitable for all climates

MasterSeal 590 is a one-component, quick-setting, portland-cement-based hydraulic repair mortar that instantly stops running water through holes or cracks in concrete or masonry. It expands as it sets to lock into place even under constant water pressure.

Recommended uses:

  • Nonmoving (static) cracks and holes with running water or moisture seepage
  • For immersion service, for anchoring vertical bolts, basements, foundations, retaining walls, & sewers

Features:

  • Fast-setting, fully hydraulic
  • Shrinkage compensated
  • One-component
  • Ready to topcoat in 15 minutes with appropriate product
  • Durable nonmetallic, non-gypsum formula
  • Formulation available for cold-weather applications

Benefits:

  • Stops running water; develops high-strength quickly
  • Sets above or below water
  • Expands to lock in place
  • Mixes easily with water only
  • Minimizes downtime
  • Maintains volume stability over time
  • Use in all seasons and climates

MasterSeal 590 is a one-component, quick-setting, portland-cement-based hydraulic repair mortar that instantly stops running water through holes or cracks in concrete or masonry. It expands as it sets to lock into place even under constant water pressure.

Recommended uses:

  • Nonmoving (static) cracks and holes with running water or moisture seepage
  • For immersion service, for anchoring vertical bolts, basements foundations, retaining walls, & sewers

Features:

  • Stops running water; develops high-strength quickly
  • Sets above or below water
  • Expands to lock in place
  • Mixes easily with water only
  • Minimizes downtime
  • Maintains volume stability over time
  • Use in all seasons and climates

Benefits:

  • Fast-setting, fully hydraulic
  • Shrinkage compensated
  • One-component
  • Ready to topcoat in 15 minutes with appropriate product
  • Durable nonmetallic, non-gypsum formula
  • Formulation available for cold-weather applications

SPEED CRETE RED LINE is a fast setting, cement based concrete and masonry patching compound which when combined with the correct amount of water, undergoes a chemical "hyper hydration" and produces a stable,low permeability, cementitious matrix.

Features/Benefits:

  • Initial set in 8 to 20 minutes
  • Final set within 30 minutes
  • Can be “shaved” to desired shape
  • High strength
  • Excellent durability
  • Compatible with galvanic anodes

Applications:

  • Interior and exterior
  • Vertical, overhead and horizontal repairs
  • Used at no slump consistency
  • Outstanding repair material for concrete pipe, curbs, sidewalks, formed and precast concrete

Link to SDS Information

BASF MasterEmaco® T 310 CI, 55 lb Bag

MasterEmaco S 466CI is a flowable, shrinkage-compensated repair concrete. It is designed for large volume repairs, including structural elements in applications from 1" (50 mm) to full depth. It has a unique formulation that provides excellent bond, resistance to sulfates and chlorides, high electrical resistivity, low permeability, high-compressive strengths, and protection from corrosion.

Recommended uses:

  • Interior and exterior
  • Large volume structural repairs
  • Repair or replacement of concrete elements

Features: 

  • Very low chloride permeability and an integral corrosion inhibitor protects reinforcing steel
  • Only requires the addition of potable water
  • High compressive strength
  • Abrasion resistant for repairs requiring protection from vehicular traffic

Benefits:

  • Excellent freeze/thaw resistance for durability in cold, wet environments, flowability makes it ideal for placement by pumping or pouring into congested location
  • Shrinkage-compensated, minimizing cracking from drying shrinkage reducing stress at the bond line

Formerly known as Emaco

MasterEmaco S 477Cl is a flowable shrinkage-compensated, form-and-pump repair mortar design for preplaced aggregate applications including structural elements. It provides high pumpability for structural repairs of columns and beams. Highlights: Very low chloride permeability and an integral corrosion inhibitor protects reinforcing steel, Flowability makes it ideal for placement by pumping or pouring into conjested locations, Excellent flowability for preplaced aggregate applications, Shrinkage compensated, minimizing cracking from drying shrinkage reducing stress at the bond line, Excellent freeze thaw resistance for durability in cold, wet enviornments, Only require the addition of potable water. Substrates: concrete.

Loading...   Loading...
Previous
of 2
Showing 1-12 of 17
© 2020 Stetson Building Products, LLC. All rights reserved.