Hardeners

MasterKure HD 100WB is a clear water-soluble, sodium-silicate-based hardening and dust proofing compound. It is easy to apply, leaves no residue, dries quickly, and is available with fugitive red dye for even application.

Recommended uses:

• Floors and walls
• Decks
• Docks
• Ramps

Features:

• Residue-free
• Available with fugitive red dye
• Soil and grease easily removed
• Water-soluble
• Easy to apply
• Quick drying

Benefits:

• Compatible with most resilient floor-covering adhesives
• Helps ensure even coverage
• Promotes fast, simpler post-construction clean up
• Easy to flush spray equipment and clean other equipment
• Saves labor costs; speeds production

MasterKure HD 100WB is a clear water-soluble, sodium-silicate-based hardening and dust proofing compound. It is easy to apply, leaves no residue, dries quickly, and is available with fugitive red dye for even application.

Recommended uses:

• Floors and walls
• Decks
• Docks
• Ramps

FEATURES:

• Residue-free
• Available with fugitive red dye
• Soil and grease easily removed
• Water-soluble
• Easy to apply
• Quick drying

Benefits:

• Compatible with most resilient floor-covering adhesives
• Helps ensure even coverage
• Promotes fast, simpler post-construction clean up
• Easy to flush spray equipment and clean other equipment
• Saves labor costs; speeds production

MasterFlow 928 grout is a hydraulic cement-based mineral aggregate non-shrink grout with extended working time

•  Ideally suited for grouting machines or plates requiring precision load-bearing support. It can be placed from fluid to damp pack over a temperature range of 45 to 90° F (7 to 32° C)

Recommended uses:

• Grouting of equipment, such as compressors and generators, pump bases and drive motors, tank bases, conveyors, etc.
• Grouting anchor bolts, rebar and dowel rods
• Grouting of precast wall panels, beams, columns, curtain walls, concrete systems and other structural and non-structural building components
• Repairing concrete, including grouting voids and rock pockets

 Specifications:

• Meets the requirements of ASTM C1107 and US Army Corps of Engineers CRD C621 (Grades B and C)
• At a fluid consistency over a 30-minute working time
• ANSI/NSF 61 certified for use with potable water
• Can be mixed at a wide range of consistencies
• Sulfate-resistant for marine and wastewater

Packaging:

• 55 lb (25 kg) polyethylene-lined bags
• 3,300 lb (1,500 kg) bulk bags

Yield:

• One 55 lb (25 kg) bag of MasterFlow 928 grout mixed with 10.5 lbs (4.8 kg) or 1.26 gallons (4.8 L) of water (fluid consistency) provides approximately 0.50 ft3 (0.014 m3) of grout.

Note:

• The water requirement may vary due to mixing efficiency, temperature, and other variables.

Storage:

• Store in unopened containers in cool, clean, dry conditions

Shelf Life:

• 55 lb bag: 1 year when properly stored
• 3,300 lb bulk bag: 3 months when properly stored

VOC Content:

• 0 g/L less water and exempt solvents

Compliances:

• ASTM C 1107 and CRD 621, Grades B and C, requirements at a fluid consistency over a temperature range of 40–90° F (4–32° C)
• ANSI / NSF 61 for use with potable water

Link to SDS Information