Restoration Contractor
Recrete™ 5 Minute is a general purpose cement based concrete repair and patching material. Recrete 5 Minute is specially formulated to provide a very fast setting repair mortar with excellent workability. Recrete 5 Minute can be used for repair and patching of vertical, overhead and horizontal areas subject to light traffic both interior and exterior.
MasterEmaco T 1060 General Purpose/All Weather is a one-component shrinkage-compensated very rapid-setting cement-based mortar. It is designed for repairing horizontal concrete surfaces where high-early strength gain is required.
Recommended uses:
- Interior and exterior
- Horizontal surfaces
- Applications requiring high early-strength gain
- Structural concrete repairs
- Partial and full-depth repairs
Features:
- Extra low permeability helps minimize chloride intrusion
- Excellent resistance to freeze/thaw cycling
- Shrinkage compensated, minimizing cracking from drying shrinkage reducing stress at the bond line
- Proprietary cement blend bonds to carbonated and noncarbonated concrete substrates
Benefits:
- Very rapid-setting so that structures can be opened to vehicular traffic in 1 hour
- Low residual moisture, can be coated in as little as 4 hours
- Can be extended up to 100% by weight providing higher yields
Formerly known as 10-60 Rapid Mortar Repair
MasterEmaco N 425 is a one-component fast-setting polymer modified portland cement-based repair mortar for vertical and overhead concrete and masonry surfaces Available in 43lb bags.
Recommended uses:
- Interior and exterior
- Vertical and overhead
- Above and below grade
- Spalls or holes in concrete
- Deteriorated edges
FEATURES:
- Non-sag consistency able to be placed in 2"(51 mm) thick lifts
- Readily sculpted, shaved, and finished to match existing substrate
- Very low chloride permeability and an integral corrosion inhibitor protects reinforcing steel
- Only requires the addition of potable water,
Benefits:
- Low shrinkage produces stable, durable bond
- Lightweight microscopic beads improve vertical and overhead workability
- Polymer modification improves adhesion and provides increased freeze/thaw stability
Formerly known as Gel Patch
Loading...
