Stetson Building Products
Skip to main content
Clear all
By Brand:

Strippers & Removers

Page of 2
Per Page
Showing 1-12 of 24
#3POST SHORE 8'10"-16'0"
#3POST SHORE 8'10"-16'0"
STD ADJUST BEAM 9' -15'
BRGHT BLUE CB28 8'CROSS
PURPLE CB47 7'CROSS BRAC
800 STAIN REMOVER 5 GAL
Prosoco Sure Klean Oil And Grease Stain Remover, 1 Gal

Heavy duty cleaner for masonry and concrete, Sure Klean® Asphalt & Tar Remover is a highly efficient multipurpose solvent cleaner for masonry and concrete. It is easy to apply and water rinsable.

||

Ideal for cleaning and surface preparation, Asphalt & Tar Remover will not damage most masonry or concrete.

||

It removes:

||
    |^
  • Asphalt, Tar (roofer’s stain)
  • |^
  • Grease
  • |^
  • Hydraulic Oil
  • |^
  • Motor Oil
  • |
||

Advantages:

||
    |^
  • Removes many sealers and protective treatments such as old curing compounds, acrylic, stearate, and chlorinated rubber sealers
  • |
Prosoco CD Cure & Seal Remover, 1 Gal
CURE & SEAL REMOVER

Ferrous Stain Remover, Metallic stain remover for masonry, Sure KIean® Ferrous Stain Remover is a specialty masonry cleaning product that effectively removes iron, manganese, vanadium, straw stains, acid burns and other metallic discolorations from brick, stone, and masonry surfaces.

||

Many staining conditions are created by excessive moisture in the walls. To avoid this, protect open wall cavities from rainwater during construction and correct any structural problems that allow water to enter the walls. 

||

New masonry cleans most effectively if done within 14 to 28 days after installation. Allowing excess mortar and grout to remain for a longer time results in more difficult cleandown and may cause more severe metallic staining.

||

Advantages:

||
    |^
  • Removes tough metallic stains quickly and easily
  • |^
  • Water rinsable
  • |

Ferrous Stain Remover, Metallic stain remover for masonry, Sure KIean® Ferrous Stain Remover is a specialty masonry cleaning product that effectively removes iron, manganese, vanadium, straw stains, acid burns and other metallic discolorations from brick, stone, and masonry surfaces. Many staining conditions are created by excessive moisture in the walls.

||

To avoid this, protect open wall cavities from rainwater during construction and correct any structural problems that allow water to enter the walls. New masonry cleans most effectively if done within 14 to 28 days after installation.

||

Allowing excess mortar and grout to remain for a longer time results in more difficult cleandown and may cause more severe metallic staining.

||

Advantages:

||
    |^
  • Removes tough metallic stains quickly and easily
  • |^
  • Water rinsable
  • |
Loading...   Loading...
Previous
of 2
Showing 1-12 of 24
© 2018 Stetson Building Products, LLC. All rights reserved.