Stetson Building Products
Skip to main content
Clear all
By Brand:

Repair Mortar

Page of 5
Per Page
Showing 1-12 of 50
E805 PERM-EPOX HT CONTR
E805 PERM-EPOX HT MAIN
Euclid Euco-Speed MP, 50 Lb
FUTURA 45 EXTENDED
TK-290 FIN SEAL TRI-

MasterEmaco T 1060 General Purpose/All Weather is a one-component shrinkage-compensated very rapid-setting cement-based mortar. It is designed for repairing horizontal concrete surfaces where high-early strength gain is required.

Recommended uses:

  • Interior and exterior
  • Horizontal surfaces
  • Applications requiring high early-strength gain
  • Structural concrete repairs
  • Partial and full-depth repairs

Features:

  • Extra low permeability helps minimize chloride intrusion
  • Excellent resistance to freeze/thaw cycling
  • Shrinkage compensated, minimizing cracking from drying shrinkage reducing stress at the bond line
  • Proprietary cement blend bonds to carbonated and noncarbonated concrete substrates

Benefits:

  • Very rapid-setting so that structures can be opened to vehicular traffic in 1 hour
  • Low residual moisture, can be coated in as little as 4 hours
  • Can be extended up to 100% by weight providing higher yields

Formerly known as 10-60 Rapid Mortar Repair

QUIKRETE SURFACE BONDING
Euclid Surface Bonding Cement, Gray
QUIKRETE SURFACE BONDNG
TAMMS SURFACE BONDING
MasterEmaco N 424 is a general purpose, fast-setting, non-sag cement-based repair mortar for small repairs on vertical, horizontal, and overhead surfaces. Recommended uses: Interior and exterior, Vertical and overhead, Above and below grade, Spalls or holes in concrete, Deteriorated edges. FEATURES: Non-sag consistency able to be placed in 1"(25 mm) thick lifts, Fast-setting, Only requires the addition of potable water.
BASF MasterEmaco® N 427, 50 lb Bag
Loading...   Loading...
Previous
of 5
Showing 1-12 of 50
© 2019 Stetson Building Products, LLC. All rights reserved.